12V DC CARBON BRUSHES
Carbon Brushes Suitable For 12v DC Motors. We Stock 3 Sizes: 4mm x 4mm, 5mm x 5mm, 6mm x 6mm. Each Brush Has A Wire That Can Be Soldered Onto The 12 Volt Motor.
The Brushes Below Are Shown By Size, You MUST Measure Your Brushes With A Vernier Or Micrometer To An Accuracy of 0.2mm Due To The Accuracy Brushes Are Made To. If You Measure With A Tape Measure, Ruler Or Steal Rule Our Brushes Are Not Likely To Fit As These Devises Are Not An Accurate Way Of Measuring.
If You Are Looking For Brushes For A Power Tool Or Garden Machinery Then Please Type Your Model Number Into The Search Bar Above.
12v DC Carbon Brushes
Most Automotive Systems Use 12 Volt And We Have Previously Sold These Brushes For Window Wiper Motors, Window Motors, Heater / Blower Systems & More.
When You Remove Your Original Brushes The Springs Should Be Left On The Holder And Should Be In A Good Condition. You Will Need To Reuse Them With These Replacement Brushes.
Always Check Your Commutator Before Ordering, If The Bottom Face Of The Carbon (That Touches The Commutator) Is Chipped Then There Is Likely To Be A Raised Segment On The Comm That Will Destroy Any Replacement Brush That You Fit.
Please Also Be Aware That If The Motor Smoked When It Failed Then It Will Not Be The Brushes That Are The Underlying Fault.
