STEHLE 300mm Diameter, 30mm Bore’, 96 Teeth Industrial Quality Circular Saw Blade. This Blade Is Designed To Be Used On Table Saws. It Is Specially Designed For Dividing And Mitre Cuts In Plastic Profiles Made From PVC, Acrylics, Plexiglass, Thermosetting Plastics, PE, PA And PU, It Will Also Cut Other Plastics”. This Blade Will Give A Fine Finish To These Materials. It Has A Kerf Of 2.8mm, A Body Of 2.2mm, A Negative Hook Angle Of -3 Degrees And Has An Alternative Top Bevel With Chamfer Tooth Configuration. The Tungsten Carbide Is The Correct Mixture (Including Binder, Type, Grain Size, Density, Hardness, Toughness And Binding Strength), Design And Optimisation For Cutting The Materials Specified Above. The Blade Has A Laser Cut Body, Tight Production Tolerances, High Concentric, Machine Controlled Adjustment And Alignment And Runout Precision, Application Specific Tungsten Carbide And Noise Reduced Ornament Design. This Blade Comes With 2 Combi Pin Holes, They Can Take Pins That Measure 10mm, 9mm, 9.5mm & 7mm Diameter And A Distance Of 60mm, 46mm, 46.5mm & 42mm Between The Centers Of Each Pin Retrospectively. If Your Saw Does Not Have Pins Then Just Ignore These Extra Holes.

We Are Able To Put In Larger Pin Holes If Required, You Will Need To Add This To Your Order Notes When You Checkout Or Email Us After You Have Ordered, Please Be Aware This Will Take Longer Than The Specified Delivery To Get Them Put In And Delivered And May Result In An Increase From The Stated Price.

‘The Bore Size Of This Blade Is 30mm, Reduction Rings Are Available To Make The Bore Size Smaller. You Can Only Use These If Your Blade Flanges (The Two Washers/ Clamps That Hold The Blade In Place) Are Larger Than 35mm In Diameter Where They Touch The Blade. If They Are Then Tell Us What Size Bore You Require Either In The Notes As You Checkout Or By Email. If They Are Smaller Than 35mm Then This Blade Will Not Be Safe To Use On Your Machine.

”(Including: PMMA Bloack Material & Acrylic Glass, Polycarbonate, PET Honeycomb Core, PE Block Material, PP Package Material, Polystyrene, PVC Foil & Vinyl Flooring, Melamine Resin Foam, GFK, AFK, HPL Laminate, Mineral Acrylic Resin, Epoxy Resin, Rubber, PU Sound Insulation, PU Anti-Slide Mat, PE Foil Printed & Acrylic Resin, Wood Fibres & Acrylic Resin And Wood & PMMA.).

Dividing And Mitre Cuts In Plastic Profiles Made From PVC, Acrylics, Plexiglass, Thermosetting Plastics, PE, PA And PU.