↓↓ Enter Your Model Number For Parts ↓↓

Desktop Up / Tablet Down

Tablet Up / Mobile Down

STEHLE Panel Cutting Blade 350mm Dia, 30mm Bore, 72 Teeth For Table Saws

Sizing Cuts In Wood-Based Panels

£134.95 Inc VAT

In stock

Desktop Above / Tablet & Mobile Below

STEHLE Panel Cutting Blade 350mm Dia, 30mm Bore, 72 Teeth For Table Saws

£134.95 Inc VAT

In stock

STEHLE 350mm Diameter, 30mm Bore’, 72 Teeth Industrial Quality Circular Saw Blade. This Blade Is Designed To Be Used On Table Saws. It Is Specially Designed For Sizing Cuts In Wood-Based Panels, It Will Also Cut Other Wood” And It Is Able To Cut Panel Materials”’. This Blade Will Give A Rough Finish To These Materials. It Has A Kerf Of 3.5mm, A Body Of 2.5mm, A Positive Hook Angle Of 10 Degrees And Has An Alternative Top Bevel Tooth Configuration. The Tungsten Carbide Is The Correct Mixture (Including Binder, Type, Grain Size, Density, Hardness, Toughness And Binding Strength), Design And Optimisation For Cutting The Materials Specified Above. The Blade Has A Laser Cut Body, Tight Production Tolerances, High Concentric, Machine Controlled Adjustment And Alignment And Runout Precision, Application Specific Tungsten Carbide And Noise Reduced Design. This Blade Comes With 2 Combi Pin Holes, They Can Take Pins That Measure 10mm, 9mm, 9.5mm & 7mm Diameter And A Distance Of 60mm, 46mm, 46.5mm & 42mm Between The Centers Of Each Pin Retrospectively. If Your Saw Does Not Have Pins Then Just Ignore These Extra Holes.

We Are Able To Put In Larger Pin Holes If Required, You Will Need To Add This To Your Order Notes When You Checkout Or Email Us After You Have Ordered, Please Be Aware This Will Take Longer Than The Specified Delivery To Get Them Put In And Delivered And May Result In An Increase From The Stated Price.

‘The Bore Size Of This Blade Is 30mm, Reduction Rings Are Available To Make The Bore Size Smaller. You Can Only Use These If Your Blade Flanges (The Two Washers/ Clamps That Hold The Blade In Place) Are Larger Than 35mm In Diameter Where They Touch The Blade. If They Are Then Tell Us What Size Bore You Require Either In The Notes As You Checkout Or By Email. If They Are Smaller Than 35mm Then This Blade Will Not Be Safe To Use On Your Machine.

”(Including: Gluelam Construction Timber, Laminated Timber, Veneered Laminated Wood, Glued Laminated Timber Board, Oak, Beech, Larch, Bangkirai Decking, Coconut, Spruce, Poplar, Balsa, Ash, Fir, Cork And Raw Woods. All Can Be Cut Across The Grain, With The Grain And Cross Cutting.)

”'(Including: Plywood, Multiplex, Wood Core Plywood, Particle Board, Chip Board, Raw Particle Board, Veneered Particle Board, Melamine Laminated Particle Board, CPL Laminated Acoustic Particle Board, HPL Laminated Particle Board, High Gloss Foiled Particle Board, Soft Fibre Board, Raw MDF, Lacquered MDF, Twin-Wall Panel, Lacquered MDF Profile, Hardboard, Flooring Panel, Construction Profile, Honeycomb Panel, Blockboard, MDF Polystyrene Panel And Wood-PMMA.)

OTHER PARTS THAT WILL FIT YOUR MACHINE:

error: Content is protected !!