↓↓ Enter Your Model Number For Parts ↓↓

Desktop Up / Tablet Down

Tablet Up / Mobile Down

DART Wood Cutting Blade 230mm Dia, 30mm Bore, 60 Teeth For Circular Saws

Very Fine Finish Wood Cutting

£49.95 Inc VAT

In stock

Desktop Above / Tablet & Mobile Below

DART Wood Cutting Blade 230mm Dia, 30mm Bore, 60 Teeth For Circular Saws

£49.95 Inc VAT

In stock

DART 230mm Diameter, 30mm Bore’, 60 Teeth Professional/ Trade Quality Circular Saw Blade. This Blade Is Designed To Be Used On Circular Saws. It Is Suitable For Cutting Soft Wood (Rip & Crosscut), Hard Wood (Rip & Crosscut), Plywood and Boards (Including MDF, Particle Boards and Hardboard). This Blade Will Give A Very Fine Finish To These Materials. It Has A Positive Hook Angle And Has An Alternative Top Bevel Tooth Configuration. The Teeth Are Tungsten Carbide Tipped. The Blade Has A Body Of 2.0mm And A Kerf Of 2.8mm. ‘The Bore Size Of This Blade Is 30mm, Reduction Rings Are Available To Make The Bore Size Smaller.

You Can Only Use These If Your Blade Flanges (The Two Washers/ Clamps That Hold The Blade In Place) Are Larger Than 35mm In Diameter Where They Touch The Blade. If They Are Then Tell Us What Size Bore You Require Either In The Notes As You Checkout Or By Email. If They Are Smaller Than 35mm Then This Blade Will Not Be Safe To Use On Your Machine.

OTHER PARTS THAT WILL FIT YOUR MACHINE:

error: Content is protected !!